Assembly
1) Insert prod into the crossbow stock to the white line.
Make sure the pressure
pad is in place between the prod and the prod retaining
screw. DO NOT OVER TIGHTEN.
2) Feed the plastic crossbow prod ends to both sides of the
prod and then feed
the string loop over the left end of the crossbow prod. Hold
the right
end of the prod in your right hand and the crossbow string
with your left.
With a friend's help to bend the right end of the prod and
slips the crossbow string
loop over it. Please make sure the string fits snugly into
the slots on the prod.
Crossbows
Crossbow Stringing
Crossbow Overview
1) Channel Groove - A Grooved section of the crossbow
down the length of the barrel, allowing the crossbow bolts
fletching to ride the crossbows length when shot.
2) Rear Sight
3) Crossbow Stock
4) Prod - This is the actual crossbow section that
stores all of the crossbows power and releases thus firing
the crossbow bolt.
5) Crossbow Nock - A Crossbow nock is a plastic cap
that sits on the end of the prod and provides a smooth
protective sleeve for the string and prevents fraying.
6) Stirrup - This is cocking aid and allows the
bowman to hold the crossbow in a stationary position while
using both hands to cock the bow string.